Here are the answers to some of the most frequently asked questions about the Bitmain Antminer E9. I hope these solutions prove to be helpful to you.
What Cryptocurrencies Can I Mine With Bitmain Antminer E9?
Bitmain Antminer E9 now supports mining ETC after downloading the most recent firmware from the official website.
What Mining Pools Does Bitmain Antminer E9 Support?
The following popular mining pools are supported by Bitmain Antminer E9 after updating to the most recent firmware on the official website.
NOTE*: Three mining pools cannot be set up to operate with different cryptocurrencies simultaneously.
Does Bitmain Antminer E9 Support Zil+ETC Mode Mining?
The mining of Zil+ETC is independent of the miner and requires assistance from mining pools.
Does Bitmain Antminer E9 Support Nicehash Mining Pool?
No, Bitmain Antminer E9 ONLY supports the most well-liked pool using eth proxy stratum protocol (for example. f2pool, antpool, hiveon, ethminer2, etc. )
The Bitmain Antminer E9 Rejection Rate is Very High, Why Does It Reach 50% Or 100%?
Reinserting the platoon to restore factory settings or upgrading the firmware and other routine operations can be tried, but most of them will need to return for repair if the rejection rate is greater than 50% and the mining pool side has only 50% of the arithmetic power.
If the mining pool is configured with ETHW or ETHF, please switch to an ETC mining pool and restart. If the rejection rate is 100% and the miner has computing power but the pool does not, please check.
The configuration of three mining pools to different coins at once is not permitted.
Can the Control Board of Bitmain Antminer E9 and Other Models Be Used in Common?
Bitmain Antminer E9 is a unique control board that can only be used with its specific model.
Does Bitmain Antminer E9 Have Sleep Mode?
No.
Does Bitmain Antminer E9 Support the SSL Protocol?
No.
Please don’t hesitate to get in touch with us if you have any questions.
