This guide will show you the normal operating temperature range of the Bitmain Antminer E9 and also other Bitmian Antminer models.
The max operating temperature of Bitmain Antminer E9 is 80 degree Celsius.
In particular, the intake air temperature of the Bitmain Antminer E9 should be within this range.
The intake air temperature may be excessive even in a cool room due to dust buildup or other factors. Please clean the Bitmain Antminer E9 if necessary.
The miner’s temperature is shown differently by various models. Notably, most of our miners have a protection system in place that causes them to shut down at dangerously high temperatures.
Below Shows the Normal Temperature of the Miners:
| ANTMINER | Temperature in degree Celsius |
| E9 | PCB max. 80 |
| L7 | PCB max. 80 |
| S19XP | PCB max. 75 |
| S19a Pro | PCB max. 80 |
| S19a | PCB max. 80 |
| S19j | PCB max. 85 |
| S19j Pro | PCB max. 85 |
| S19 Pro | PCB max. 80 |
| S19 | PCB max. 80 |
| T19 | PCB max. 80 |
| Z15/Z15j/Z15e | PCB max. 80 |
| S17e/T17e/S17+ | PCB max. 80 |
| T17+ | PCB max. 75 |
| S17/S17 Pro/T17 | PCB max. 75 |
| S15 | PCB max. 80 |
| T15 | PCB max. 80 |
| S11 | PCB max. 95 |
| Z9MINI | Chip max. 125 |
| PCB max. 80 | |
| Z9 | PCB max. 80 |
| V9 | PCB max. 80 |
| S9 | Chip max. 135 |
| PCB max. 90 | |
| S9I | PCB max. 85 |
| S9j/S9-Hydro | PCB max. 95 |
| T9 | Chip max. 135 |
| PCB max. 90 | |
| T9+ | Chip max. 125 |
| PCB max. 95 | |
| S9 SE/S9k | PCB max. 85 |
| B7 | PCB max. 75 |
| K5 | PCB max. 80 |
| D5 | PCB max. 85 |
| DR3/DR5 | PCB max. 85 |
| E3 | PCB max. 65 |
| L3+/L3++ | PCB max. 90 |
| D3 | PCB max. 85 |
| A3 | Chip max. 115 |
| PCB max. 85 | |
| X3 | Chip max. 127 |
| PCB max. 80 | |
| B3 | Chip max. 127 |
| PCB max. 80 |
If you see that the temperature is rising and getting close to the safe level, get in touch with us for support and technical guidance.
Please feel free to contact us if you have any questions.
